Submicron-scale experimental analyses of multi-asperity contacts with different roughnesses

B. Brodnik Žugelj, M. Kalin

Tribology International 119 (2018) 667-671

Abstract

The multi-asperity contacts between two nominally flat surfaces were studied experimentally with sub-micron resolution, to provide detailed experimental information that is seriously lacking today. The relationships between the contact pressure, the real contact area and the deformation of asperities were investigated for realistic steel specimens with different roughness in the full engineering loading range up to the material's macro yield stress (Y). For the rough surfaces the real contact area increases almost linearly with slight decay at 0.35·Y as the load increases, and reaches 20% of nominal contact area at yield stress. This decay in real contact area growth is very obvious at 0.55·Y for smooth surface that reaches 10% of nominal contact area at yield stress. Deformation of all asperities is increasing with roughness. However, for rough surfaces the deformation is constantly increasing with load, while for the smooth surface the deformation of the asperities severely decreases when the nominal contact pressure reaches about 0.4 Y.

URL: https://doi.org/10.1016/j.triboint.2017.06.036

Keywords: In-situ experiment, Engineering surfaces, Roughness, Static loading conditions, Real contact area

Export bibliography