Papers

2024

• Super-low friction and wear in steel contacts enabled by tribo-induced structural degradation of graphene quantum dots

  I. Nadeem, B. Ambrožič, G. Dražić, J. Kovač, A. Cavaleiro, M. Kalin, Materials & Design 244 (2024) 113111 1-14

• Robust and durable superlubricity enabled by carboxylated graphene quantum dots in lubricated steel contacts

  I. Nadeem, M. Finšgar, G. Dražić, M. Malok, A. Morina, M. Kalin, Carbon 226 (2024) 119226 1-16

• Influence of TiB2 and wear conditions on friction and wear behaviour of SiC ceramics in reciprocating sliding

  C. S. Prakasarao, M. Kalin, B. V. M. Kumar, Journal of the European Ceramic Society 44 (2024) 2704–2719

• Aging of polyetheretherketone (PEEK) and polyphthalamide (PPA) in polar and non-polar lubricant base oils

  P. M. Ferreira, B. Trindade, M. Kalin, Polymer Testing 131 (2024) 108342 1-12

• Tribological performance of fatty acid, acid/amine additive mixture and ionic liquid

  J. Shu, C. Espejo, M. Kalin, A. Morina, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology (2024) (in press)

• Synergism between bio-based oleate ester and low-concentration ZDDP under reciprocating contacts

  J. Shu, C. Espejo, M. Kalin, A. Morina, Tribology International 192 (2024) 109252 1-11

• The effect of temperature on the transfer layer of an aluminium alloy on tool steel and the effect of CrN coating

  M. Kalin, J. Jerina, S. K. Sharma, J. Kovač, Tribology - Materials, Surfaces & Interfaces 18 (2024) 11-19

• Effect of multi-scale fillers on the tribological behavior of UHMWPE composites in water-lubricated contacts

  P. Gangwani, J. Kovač, N. Emami, M. Kalin, Tribology International 196 (2024) 109669 1-18

• Effect of the coefficient of friction on gear-tooth root fatigue for both dry and lubricated running polymer gears

  S. Matkovič, M. Kalin, Tribology International 194 (2024) 109525 1-9

• Towards a comprehensive characterization of spatio-temporal dependence of light-induced electromagnetic forces in dielectric liquids

  N. G. C. Astrath, E. V. Bergmann, B. Anghinoni, G. A. S. Flizikowski, A. Novatski, C. Jacinto, T. Požar, M. Kalin, L. C. Malacarne, M. L. Baesso, Scientific Reports 14 (2024) 5595 1-13

• In-situ micro-asperity investigation of real contact area formation during sliding with the effects of roughness and normal load considered

  P. Jan, B. Žugelj, M. Kalin, Tribology International 191 (2024) 109171 1-9

• Mechanical constraints to unbound expansion of B. subtilis on semi-solid surfaces

  M. Blaznik, C. Y. Fei, A. Košmrlj, M. Kalin, D. Stopar, Microbiology Spectrum 12 (2024) 1-16

• Glycerol aqueous solutions for the enhanced tribological behaviour of polymer composites sliding against steel

  A. Trajkovski, S. Matkovič, N. Novak, I. Nadeem, M. Kalin, F. Majdič, Tribology International 192 (2024) 109173 1-11

2023

• Does a Compatibilizer Enhance the Properties of Carbon Fiber-Reinforced Composites?

  P. Gangwani, M. Kalin, N. Emami, Polymers 15 (2023) 4608 1-18

• Mechanical properties and tribological performance of polyoxymethylene/short cellulose fiber composites

  L. M. Kneissl, G. Gonçalves, R. Joffe, M. Kalin, N. Emami, Polymer Testing 128 (2023) 108234 1-12

• Wear of hydraulic pump with real particles and medium test dust

  N. Novak, A. Trajkovski, M. Polajnar, M. Kalin, F. Majdič, Wear 532-533 (2023) 205101 1-13

• Performance of polymer composites lubricated with glycerol and water as green lubricants

  A. Trajkovski, N. Novak, J. Pustavrh, M. Kalin, F. Majdič, Applied Sciences 13 (2023) 7413 1-14

• Degradation of hydraulic system due to wear particles or medium test dust

  N. Novak, A. Trajkovski, M. Kalin, F. Majdič, Applied Sciences 13 (2023) 13 1-20

• A conceptual design of a thermal switch capacitor in a magnetocaloric device: experimental characterization of properties and simulations of operating characteristics

  N. Petelin, M. Kalin, A. Kitanovski, Journal of Physics: Energy 5 (2023) 035007 1-15

• Effect of Spraying Power on the Tribological Properties of Alumina and Alumina-Graphite Coatings

  J. S. Mathew, L. Marcinauskas, Ž. Kavaliauskas, R. Kėželis, M. Kalin, Coatings 13 (2023) 1165 1-15

• Applying the angular spectrum representation to calculate the optical force density generated in dielectrics by tightly focused laser beams

  B. Anghinoni, L. C. Malacarne, T. Požar, N. G. C. Astrath, International Journal of Modern Physics C 34 (2023) 2350163 1-26

• Base lubricants for green stamping: The effects of their structure and viscosity on tribological performance

  M. Polajnar, L. Čoga, M. Kalin, Friction 11 (2023) 1741-1754

• The W-cluster reactive sites interaction model for WDLC coatings with ionic liquids

  M. S. Arshad, L. Čoga, T. Geue, J. Kovač, S. M. A. Cruz, M. Kalin, Tribology International 185 (2023) 108550 1-11

• Tribological behaviour of green wood-based unrecycled and recycled polypropylene composites

  P. Jan, S. Matkovič, M. Bek, L. Slemenik Perše, M. Kalin, Wear 524-525 (2023) 204826.

• Influence of graphite content on the tribological properties of plasma sprayed alumina-graphite coatings

  L. Marcinauskas, J. S. Mathew, M. Milieška, M. Aikas, M. Kalin, Surfaces and Interfaces 38 (2023) 102763 1-13

• Tribological Properties of Cr₂O₃, Cr₂O₃–SiO₂-TiO₂ and Cr₂O₃–SiO₂-TiO₂-Graphite Coatings Deposited by Atmospheric Plasma Spraying

  L. Bastakys, L. Marcinauskas, M. Milieška, M. Kalin, R. Kėželis, Coatings 13 (2023) 408 1-17

• Superior macro-scale tribological performance of steel contacts based on graphene quantum dots in aqueous glycerol

  I. Nadeem, M. Malok, J. Kovač, T. Bin Yaqub, A. Cavaleiro, M. Kalin, Tribology International 181 (2023) 108328 1-15

• A review on gasification and pyrolysis of waste plastics

  H. H. Shah, M. Amin, A. Iqbal, I. Nadeem, M. Kalin, A. M. Soomar, A. M. Galal, Frontiers in Chemistry 10 (2023) 1-38

• Comparison of graphene as an oil additive with conventional automotive additives for the lubrication of steel and DLC-coated surfaces

  J. Kogovšek, M. Kalin, Tribology International 180 (2023) 108220 1-11

• The role of electrostriction in the generation of acoustic waves by optical forces in water

  N. G. C. Astrath, B. Anghinoni, G. A. S. Flizikowski, V. S. Zanuto, L. C. Malacarne, M. L. Baesso, T. Požar, D. Razansky, Photoacoustics 29 (2023) 100445 1-7

• Elastic and plastic deformation of surface asperities and their load-carrying mechanisms during the formation of a real contact area

  M. Kalin, B. Žugelj, M. Lamut, K. Hamouda, Tribology International 178 (2023) 108067 1-9

• Influence of load, sliding speed and heat-sink volume on the tribological behaviour of polyoxymethylene (POM) sliding against steel

  M. S. N. Siddiqui, A. Pogačnik, M. Kalin, Tribology International 178 (2023) 108029 1-12

2022

• Microstructured magnetoactive elastomers for switchable wettability

  R. Kriegl, G. Kravanja, L. Hribar, L. Čoga, I. Drevenšek-Olenik, M. Jezeršek, M. Kalin, M. Shamonin, Polymers 14 (2022) 3883 1-22

• Laser-induced shock-wave-expanded nanobubbles in spherical geometry

  D. Horvat, V. Agrež, T. Požar, B. Starman, M. Halilovič, R. Petkovšek, Ultrasonics Sonochemistry 89 (2022) 106160 1-12

• Tribological properties of chromia and chromia composite coatings deposited by plasma spraying

  L. Bastakys, L. Marcinauskas, M. Milieška, M. Grigaliūnas, S. Matkovič, M. Aikas, Coatings 12 (2022) 1035 1-9

• Erosive wear behavior of spark plasma-sintered SiC–TaC composites

  S. K. Sharma, K. Chaudhary, Y. Gupta, M. Kalin, B. V. M. Kumar, International Journal of Applied Ceramic Technology 19 (2022) 1691-1701

• Study on the influence of interfacial slip on the lubrication performance of a step slider bearing

  Z. G. Jing, F. Guo, W. Jin, M. Kalin, M. Polajnar, Tribology International 176 (2022) 107822 1-9

• Long-term creep compliance of wood polymer composites: using untreated wood fibers as a filler in recycled and neat polypropylene matrix

  M. Bek, A. Aulova, K. Pušnik Črešnar, S. Matkovič, M. Kalin, L. Slemenik Perše, Polymers 14 (2022) 2539 1-19

• Tribological performance of a UHMWPE-based multiscale composite under different lubrication and loads

  H. S. Vadivel, J. Somberg, M. Kalin, N. Emami, Lubrication Science 34 (2022) 480‐492

• Unveiling bulk and surface radiation forces in a dielectric liquid

  N. G. C. Astrath, G. A. S. Flizikowski, B. Anghinoni, L. C. Malacarne, M. L. Baesso, T. Požar, M. Partanen, I. Brevik, D. Razansky, S. E. Bialkowski , Light, science & applications 11 (2022) 103 1-10

• Effect of expanded graphite on mechanical and tribological properties of polyamide 6/glass fibre composites

  D. Japić, S. Kulovec, M. Kalin, J. Slapnik, B. Nardin, M. Huskić, Advances in polymer technology 2022 (2022) 974889 1-8

• Differences in nano-topography and tribochemistry of ZDDP tribofilms from variations in contact configuration with steel and DLC surfaces

  L. Čoga, S. Akbari, J. Kovač, M. Kalin, Friction 19 (2022) 296–315

• Time-dependent properties of newly developed multiscale UHMWPE composites

  H. S. Vadivel, Z. Al-Maqdasi, L. Pupure, R. Joffe, M. Kalin, N. Emami, Polymer testing 105 (2022) 107400 1-10

2021

• Reconfigurable surface micropatterns based on the magnetic field-induced shape memory effect in magnetoactive elastomers

  M. Lovšin, D. Brandl, G. Glavan, I. A. Belyaeva, L. Cmok, L. Čoga, M. Kalin, M. Shamonin, I. Drevenšek-Olenik, Polymers 13 (2021) 4422 1-13

• Improvement of the tribological properties of alumina coatings by zirconia addition

  J. S. Mathew, L. Marcinauskas, M. Kalin, R. Keželis, Ž. Kavaliauskas, G. Gecevičius, V. Čapas, Coatings 11 (2021) 991 1-14

• Elasto-hydrodynamic friction changes on steel surfaces arising from the modified surface energy of the steel due to additive boundary films

  M. Polajnar, B. Thiebaut, F. Jarnias, M. Kalin, Tribology international 164 (2021) 107203 1-10

• Wear-coefficient analyses for polymer-gear life-time predictions: A critical appraisal of methodologies

  S. Matkovič, A. Pogačnik, M. Kalin, Wear 480-481 (2021) 203944 1-12

• Do the particle size, molecular weight, and processing of UHMWPE affect its thermomechanical and tribological performance?

  H. S. Vadivel, M. Bek, U. Šebenik, L. Slemenik Perše, R. Kádár, N. Emami, M. Kalin, Journal of Materials Research and Technology 12 (2021) 1728-1737

• Effects of slide-to-roll ratio and temperature on the tribological behaviour in polymer-steel contacts and a comparison with the performance of real-scale gears

  S. Matkovič, M. Kalin, Wear 477 (2021) 203789 1-13

• New strategy for reducing the EHL friction in steel contacts using additive-formed oleophobic boundary films

  M. Kalin, M. Kus, Friction 9 (2021) 1346-1360

2020

• Physicochemical and tribological characterizations of WDLC coatings and ionic-liquid lubricant additives : potential candidates for low friction under boundary-lubrication conditions

  M. S. Arshad, J. Kovač, S. Cruz, M. Kalin, Tribology International 151 (2020) 106482 1-10

• Local mechanical and frictional properties of Ag/MoS₂-doped self-lubricating Ni-based laser claddings and resulting high temperature vacuum performance

  H. Torres, H. Rojacz, L. Čoga, M. Kalin, M. Rodríguez Ripoll, Materials and Design 186 (2020) 108296 1-13

• Additive chemical structure and its effect on the wetting behaviour of oil at 100°C

  M. Kus, M. Kalin, Applied Surface Science. [Print ed.]. Mar. 2020, vol. 506, str. 1-11.

• Submicron-scale experimental analyses of the multi-asperity contact behaviour of various steels, an aluminium alloy and a polymer

  B. Brodnik Žugelj, M. Kalin, Tribology International 141 (2020) 105955 1-8

• Tribology of solid-lubricated liquid carbon dioxide assisted machining

  F. Pušavec, L. Sterle, M. Kalin, D. Mallipeddi, P. Krajnik, CIRP annals. 2020, vol. 69, iss. 1, str. 1-4

• Effect of graphite concentration on the tribological performance of alumina coatings

  L. Marcinauskas, J. S. Mathew, M. Milieška, M. Aikas, M. Kalin, Journal of alloys and compounds. [Print ed.]. Jun. 2020, vol. 827, str. 1-8

2019

• Green Tribology for the Sustainable Engineering of the Future

  M. Kalin, M. Polajnar, M. Kus, F. Majdič, Strojniški vestnik - Journal of Mechanical Engineering 65 (2019) 11-12, 709-727.

• Lubrication performance of graphene-containing oil on steel and DLC-coated surfaces

  J. Kogovšek, M. Kalin, Tribology International 138 (2019) 59-67

• Influence of additives and their molecular structure on the static and dynamic wetting of oil on steel at room temperature

  M. Kus, M. Kalin, Applied Surface Science. October 2019. vol.490, p. 420-429.

• Effect of polarity and various contact pairing combinations of electrographite, polymer-bonded graphite and copper on the performance of sliding electrical contacts

  D. Poljanec, M. Kalin, Wear. Vol. 426–427, Part B, April 2019, p. 1163-1175.

• Tribological performance and degradation of 1- n -butyl-1-methylpyrrolidinium methylsulfate ionic liquid in glycerol as lubricant for steel-steel sliding contacts

  V. Pejaković, V. Totolin, A. Ristic, C. Gabler, M. Kalin, N. Dörr, Lubrication Science (2019). 10.1002/ls.1455.

• Influence of a Diamond-Like Carbon-Coated Mechanical Part on the Operation of an Orbital Hydraulic Motor in Water

  E. Strmčnik, F. Majdič, M. Kalin, Metals 2019, 9(4), 466

• Additive Adsorption on DLC Coatings in Static and Tribological Conditions Using Neutron Reflectometry

  L. Čoga, R. Simič, T. Geue, M. Kalin, (2019) Front. Mech. Eng. 5:10

• Water-lubricated behaviour of AISI 440C stainless steel and a DLC coating for an orbital hydraulic motor application

  E. Strmčnik, F. Majdič, M. Kalin, Tribology International. Vol.131, March 2019, p. 128-136.

• Synergisms and antagonisms between MoS₂ nanotubes and representative oil additives under various contact conditions.

  A. M. Tomala, M. Rodríguez Ripoll, J. Kogovšek, M. Kalin, A. Bednarska, R. Michalczewski, M. Szczerek, Tribology International 129 (2019) 137-150

2018

• Influence of the contact parameters and several graphite materials on the tribological behaviour of graphite/cooper two-disc electrical contacts

  M. Kalin, D. Poljanec, Tribology International, 126 (2018) 192-205.

• Influence of contact parameters on the tribological behaviour of various graphite/graphite sliding electrical contacts

  D. Poljanec, M. Kalin, L. Kumar, Wear 406-407 (2018) 75-83.

• Microstructure and tribological properties of plasma sprayed alumina and alumina-graphite coatings

  L. Marcinauskas, J. Shiby Mathew, M. Milieška, B. Thanigachalam, A. Kupec, R. Česnavičius, R. Kėželis, M. Kalin, Surface & Coatings Technology 350 (2018) 401-409

• Galling growth analysis in metal forming

  H. Kitano, K. Dohda, M. Kalin, K. F. Ehmann, Manufacturing Letters 18 (2018) 32-35.

• Submicron-scale experimental analyses of multi-asperity contacts with different roughnesses

  B. Brodnik Žugelj, M. Kalin, Tribology International 119 (2018) 667-671

2017

• The dominant effect of temperature on the fatigue behaviour of polymer gears

  M. Kalin, A. Kupec, Wear 376-377 (2017) 1339-1346.

• Neutron diffraction from superparamagnetic colloidal crystals

  M. Ličen, I. Drevenšek-Olenik, L. Čoga, S. Gyergyek, S. Kralj, M. Fally, C. Pruner, P. Geltenbort, U. Gasser, G. Nagy, J. Klepp, Journal of Physics and Chemistry of Solids 110 (2017) 234–240.

• Room and high temperature reciprocated sliding wear behavior of SiC-WC composites

  S. K. Sharma, B. V. M. Kumar, B. B. Žugelj, M. Kalin, Y.-W. Kim, Ceramics International 43 (2017) 16827-16834

• Determination of Schottky barrier height and enhanced photoelectron generation in novel plasmonic immobilized multisegmented (Au/TiO2) nanorod arrays (NRAs) suitable for solar energy conversion applications

  M. S. Arshad, Š. Trafela, K. Ž. Rožman, J. Kovač, P. Djinović, A. Pintar, Journal of Materials Chemistry C 5 (2017) 10509-10516

• Friction and wear performance of functionally graded ductile iron for brake pads

  M. Polajnar, M. Kalin, I. Thorbjornsson, J.T. Thorgrimsson, N. Valle, A. Botor-Probierz, Wear 382–383 (2017) 85–94.

• Electron trapping energy states of TiO2−WO3 composites and their influence on photocatalytic degradation of bisphenol

  G. Žerjav, M. S. Arshad, P. Djinović, J. Zavašnik, A. Pintara, Applied Catalysis B: Environmental 209 (2017) 273–284

• Interactions between MoS₂ nanotubes and conventional additives in model oils

  A. Tomala, M. Rodríguez Ripoll, C. Gabler, M. Remškar, M. Kalin, Tribology International 110 (2017) 140–150.

• Tribological properties of polyamide (PA6) in self-mated contacts and against steel as a stationary and moving body

  A. Pogačnik, A. Kupec, M. Kalin, Wear 378-379 (2017) 17–26.

• In-situ observations of a multi-asperity real contact area on a submicron scale

  Blaž Brodnik Žugelj, Mitjan Kalin, Strojniški vestnik - Journal of Mechanical Engineering 63 (2017) 351-362

• Friction and anti-galling properties of hexagonal boron nitride (h-BN) in aluminium forming

  B. Podgornik, F. Kafexhiu, T. Kosec, J. Jerina, M. Kalin, Wear 388 -389 (2017) 2-8.

• High‐speed optical imaging of liquid film flow and liquid macro‐slip over free surfaces with different surface energies

  M. Polajnar, B. Bizjan, B. Širok, M. Kalin, Lubrication Science (2017) 0: 1-10.

• Experimentally derived Friction Model to evaluate the Anti-Wear and Friction-Modifier Additives in Steel and DLC Contacts

  K. Simonović, M. Kalin, Tribology International 111 (2017) 116–137.

• Improved electron-hole separation and migration in anatase TiO2 nanorod/reduced graphene oxide composites and their influence on photocatalytic performance

  G. Žerjav, M. S. Arshad, P. Djinović, I. Junkar, J. Kovač, J. Zavašnik, A. Pintar, Nanoscale 9 (2017) 4578–4592

• Synergism between particles of PTFE and hBN to enhance the performance of oils

  P. Gangwani, M. K. Gupta, J. Bijwe, Wear 384-385 (2017) 169–177

2016

• Characterisation of food contact non-stick coatings containing TiO₂ nanoparticles and study of their possible release into food

  V. Golja, G. Dražić, M. Lorenzetti, J. Vidmar, J. Ščančar, M. Zalaznik, M. Kalin, S. Novak, Food Additives & Contaminants: Part A (2016)

• Molecular recognition of a lipophilic guanosine derivative in Langmuir films at the air-water interface

  L. Čoga, L. Spindler, S. Masiero, I. Drevenšek-Olenik, Biochimica et Biophysica Acta (BBA) - General Subjects (2016)

• Effect of the type, size and concentration of solid lubricants on the tribological properties of the polymer PEEK

  M. Zalaznik, M. Kalin, S. Novak, G. Jakša, Wear 364-365 (2016) 31-39.

• Effect of ZDDP concentration on the thermal film formation on steel, hydrogenated non-doped and Si-doped DLC

  S. Akbari, J. Kovač, M. Kalin, Applied Surface Science 383 (2016) 191-199.

• Methodology of a statistical and doe approach to the prediction of performance in tribology : a DLC boundary-lubrication case study

  K. Simonović, M. Kalin, Tribology international 101 (2016) 10-24.

• Influence of concentration and anion alkyl chain length on tribological properties of imidazolium sulfate ionic liquids as additives to glycerol in steel-steel contact lubrication

  V. Pejaković, C. Tomastik, N. Dörr, M. Kalin, Tribology international 97 (2016) 234-243.

• Sliding evolution of the mechanical behaviour of zinc dialkyldithiophosphate tribofilms on diamond-like carbon coatings

  L. Bartolomé, E. Oblak, M. Kalin, Tribology letters 62 (2016) 1-9.

• The role of the crystal orientation (c-axis) on switching field distribution and the magnetic domain configuration in electrodeposited hcp Co–Pt nanowires

  M. S. Arshad, P. M. Proenca, Š. Trafela, V. Neu, U. Wolff, S. Stienen, M. Vazques, S. Kobe, K. Ž. Rožman, Journal of Physics D: Applied Physics 49 (2016) 185006 1-13

• Fully transparent nanocomposite coating with an amorphous alumina matrix and exceptional wear and scratch resistance

  M. Valant, U. Luin, M. Fanetti, A. Mavrič, K. Vyshniakova, Z. Siketić, M. Kalin, Advanced functional materials 24 (2016) 4362-4369.

• Evolution of the nano-scale mechanical properties of tribofilms formed from low- and high-SAPS oils and ZDDP on DLC coatings and steel

  M. Kalin, E. Oblak, S. Akbari, Tribology International 96 (2016) 43-56.

• Mechanical behaviour and constitutive models of ZDDP tribofilms on DLC coatings using nano-indentation data and finite element modelling

  L. Bartolomé, E. Oblak, M. Kalin, Tribology International 95 (2015) 19-26.

• Influence of the processing temperature on the tribological and mechanical properties of poly-ether-ether-ketone (PEEK) polymer

  M. Zalaznik, M. Kalin, S. Novak, Tribology international 94 (2016) 92-97.

• Adsorption of alcohols and fatty acids onto hydrogenated (a-C:H) DLC coatings

  R. Simič, M. Kalin, J. Kovač, G. Jakša, Applied Surface Science 363 (2016) 466-476.

• Comparing surface topography parameters of rough surfaces obtained with spectral moments and deterministic methods

  M. Kalin, A. Pogačnik, I. Etsion, B. Raeymaekers, Tribology international 93 (2016) 137-141.

• Stable dielectric response of low-loss aromatic polythiourea thin films on Pt/SiO₂ substrate

  A. Eršte, L. Fulanović, L. Čoga, M. Lin, Y. Thakur, Q. M. Zhang, V. Bobnar, Journal of Advanced Dielectrics, 6 (2016) 1650003-1-1650003-4

2015

• Frictional behaviour of imidazolium sulfate ionic liquid additives under mixed slide-to-roll conditions. Part 1, Variation of mixtures with identical weight ratio of ionic liquid additive

  V. Pejaković, M. Kalin, Lubrication science 27 (2015) 463-477.

• Effect of the slide-to-roll ratio and the contact kinematics on the elastohydrodynamic friction in diamond-like-carbon contacts with different wetting behaviours

  M. Polajnar, M. Kalin, Tribology Letters 60 (2015) 1-10.

• Relationship between the nano-scale topographical and mechanical properties of tribochemical films on DLC coatings and their macroscopic friction behavior

  E. Oblak, M. Kalin, Tribology Letters 59 (2015).

• Mikroskopija pri Brewstrovem kotu

  L. Čoga, I. Drevenšek-Olenik, Obzornik za matematiko in fiziko, 62 (2015) 88-96.

• Magnetization-switching study of fcc Fe-Pd nanowire and nanowire arrays studied by in-field magnetic force microscopy

  D. Pečko, M. S. Arshad, S. Šturm, S. Kobe, K. Ž. Rožman, IEEE Transaction on Magnetics 51 (2015) 2300404 1-4

• Multimodal hybrid FePt/SiO2/Au nanoparticles for nanomedical applications ecombining photothermal stimulation and manipulation with an external magnetic field

  N. Kostevšek, K. Ž. Rožman, M. S. Arshad, M. Spreitzer, S. Kobe, S. Šturm, The Journal of Physical Chemistry C 119 (2015) 16374-16382

• Microstructure-dependent leakage-current properties of solution-derived (K0.5Na0.5)NbO3 thin films

  A.Kupec, H. Uršič, R. Frunza, E. Tchernychova, B. Malič, Journal of the European Ceramic Society 35/13 (2015) 3507-3511

• Aluminium-alloy transfer to a CrN coating and a hot-work tool steel at room and elevated temperatures

  J. Jerina, M. Kalin, Wear 340-341 (2015) 82-89.

• Tribological behaviour of a PEEK polymer containing solid MoS₂ lubricants

  M. Zalaznik, S. Novak, M. Huskić, M. Kalin, Lubrication Science 28 (2015).

• Ion-specific self-assembly of a lipophilic guanosine derivative in thin surface films

  L. Čoga, S. Masiero, I. Drevenšek-Olenik, Langmuir 31 (2015) 4837-4843.

• The influence of surface modification on bacterial adhesion to titanium-based substrates

  M. Lorenzetti, I. Dogša, T. Stošicki, D. Stopar, M. Kalin, S. Kobe, S. Novak, ACS Applied Materials & Interfaces 7 (2015) 1644–1651.

• Aqueous electrophoretic deposition of bulk polyether ether ketone (PEEK)

  A. Iveković, S. Novak, M. Lukek, M. Kalin, Journal of materials processing technology 223 (2015) 58-64.

• The effect of temperature and sliding distance on coated (CrN, TiAlN) and uncoated nitrided hot-work tool steels against an aluminium alloy

  M. Kalin, J. Jerina, Wear 330/331 (2015) 371-379.

• Pyridinium based dicationic ionic liquids as base lubricants or lubricant additives

  M. Mahrova, F. Pagano, V. Pejaković, A. Valea, M. Kalin, A. Igartua, E. Tojo, Tribology International 82 (2015) 245-254.

• Frictional behaviour of imidazolium sulfate ionic liquid additives under mixed slide-to-roll conditions. Part 2, Influence of concentration and chemical composition of ionic liquid additive

  V. Pejaković, A. Igartua, M. Kalin, Lubrication science (2015).

• Wear and friction behaviour of poly-ether-ether-ketone (PEEK) filled with graphene, WS₂ and CNT nanoparticles

  M. Kalin, M. Zalaznik, S. Novak, Wear 332/333 (2015) 855-862.

2014

• Angular dependence of the coercivity in electrodeposited Co-Pt nanostructures with a tube-wire morphology

  M. S. Arshad, D. Pečko, S. Šturm, J. Escrig, M. Komelj, P. J. Mcguiness, S. Kobe, K. Ž. Rožman, IEEE International Magnetics 50 (2014) 2302904 1-4

• Effects of acid treatment at different temperatures on the surface dielectric properties of low-density polyethylene

  K. Simonović, I. Petronijević, D. Kostoski, J. Dojčilović, A. S. Luyt, D. Dudić, Polymer international 63 (2014) 1924-1929.

• Effect of magnetocrystalline anisotropy on the magnetic properties of electrodeposited Co-Pt nanowires

  M. S. Arshad, S. Šturm, J. Zavašnik, P. A. Espejo, J. Escrig, M. Komelj, P. J. Mcguiness, S. Kobe, K. Ž. Rožman, Journal of Nanoparticle Research 16 (2014) 2688 1-16

• Microstructure and magnetic properties of electrodeposited Co-Pt nanowires (NWs) with diameters below 100 nm

  M. S. Arsahd, J. Zavašnik, S. Šturm, P. J. Mcguiness, S. Kobe, K. Ž. Rožman, IEEE Magnetics Letters 5 (2014), 6700204 1-4

• Electrodeposited hard-magnetic Fe[sub](50)Pd[sub](50) nanowires from an ammonium-citrate-based bath

  D. Pečko, K. Ž. Rožman, N. Kostevšek, M. S. Arshad, B. Markoli, Z. Samardžija, S. Kobe, Journal of Alloys and Compounds 605 (2014) 71-79

• Stable dielectric response in lead-free relaxor (K0.5Na0.5)NbO3 -SrTiO3 thin films

  A Eršte, A. Kupec, B. Kmet, B. Malič, V. Bobnar, Journal of Advanced Dielectrics 4/2 (2014), 1450012-1-1450012-5

• Study of thermal decomposition of (K0.5Na0.5)NbO3 thin-films precursors with different amounts of alkali-acetate excess

  A. Kupec, O.C. Mocioiu, J. Cilenšek, M. Zaharescu, B. Malič, Acta chimica slovenica 61/3 (2014) 548-554

• Structural and dielectric properties of the lead-free (1−x)K0.5Na0.5NbO3–xSrTiO3 thin films from solutions

  A. Kupec, B. Malic, Journal of Alloys and Compounds, 596 (2014) 32-38

• Sonochemical synthesis of mackinawite and the role of Cu addition on phase transformations in the FeS system

  J. Zavašnik, N. Stanković, M. S. Arshad, A. Rečnik, Journal of Nanoparticle Research 16 (2014) 2223 1-13

• Various MoS₂-, WS₂- and C-based micro- and nanoparticles in boundary lubrication

  J. Kogovšek, M. Kalin, Tribology Letters 53 (2014) 585-597.

• Miscibility and tribological investigations of ionic liquids in biodegradable esters

  M. Kronberger, F. Pagano, V. Pejaković, A. Igartua, E. Urbistondo, M. Kalin, Lubrication science 26 (2014) 463-487.

• Fatty Acid Adsorption on Several DLC Coatings Studied by Neutron Reflectometry

  R. Simič, M. Kalin, T. Hirayama, P. Korelis, T. Geue, Tribology Letters 53 (2014) 199-206.

• Characteristics of the stationary behaviour of water- and oil-based power-control hydraulics

  F. Majdič, M. Kalin, Mechanika 20 (2014) 274-281.

• The detection of the early stages of ageing in an LDPE + graphite composite by comparison of dielectric responses induced by sinusoidal and triangular signals

  I. Petronijević, K. Simonović, F. Marinković, J. Dojčilović, A. S. Luyt, D. Dudić, Express polymer letters 8 (2014) 733-744.

• Neutron-reflectometry study of alcohol adsorption on various DLC coatings

  M. Kalin, R. Simič, T. Hirayama, T. Geue, P. Korelis, Applied Surface Science 288 (2014) 405-410.

• Ab-initio investigation of chemical-bond formation at the diamond-like carbon surface

  M. Komelj, M. Kalin, J. Durham, Lubrication science 26 (2014) 440-445.

• Two novel ternary dicopper(II) μ-guanazole complexes with aromatic amines strongly activated by quantum dots for DNA cleavage

  J. Heárnandez-Gil, S. Ferrer, A. Castiñeiras, M. Liu-González, F. Lloret, Á. Ribes, L. Čoga, A. Bernecker, J. C. Mareque-Rivas, Inorganic Chemistry 53 (2014) 578-593

• The wetting of steel, DLC coatings, ceramics and polymers with oils and water: The importance and correlations of surface energy, surface tension, contact angle and spreading

  M. Kalin, M. Polajnar, Applied Surface Science 293 (2014) 97-108.

• Test rig and comparison of pressure changes at transient phenomena in water- and oil-based power-comtrol hydraulics

  F. Majdič, M. Kalin, Journal of vibroengineering 16 (2014) 401-411.

• Initiation and evolution of the aluminium alloy transfer on hot work tool steel at temperatures from 20 °C to 500 °C

  J. Jerina, M. Kalin, Wear 319 (2014) 234-244.

• Lamellar versus compact self-assembly of lipoguanosine derivatives in thin surface films

  L. Čoga, S. Masiero, I. Drevenšek-Olenik, Colloids and Surfaces B: Biointerfaces 121 (2014) 114-121.

• The formation of tribofilms of MoS₂ nanotubes on steel and DLC-coated surfaces

  M. Kalin, J. Kogovšek, J. Kovač, M. Remškar, Tribology Letters 55 (2014) 381-391.

• Influence of temperature on tribological behaviour of ionic liquids as lubricants and lubricant additives

  V. Pejaković, M. Kronberger, M. Kalin, Lubrication Science 26 (2014) 107-115.

2013

• Phase transitional behavior of potassium sodium niobate thin films

  A. Kupec, P. Gemeinerc, B. Dkhil, B. Malič, Thin Solid Films 539 (2013) 317-322

• Improving the performance of a proportional 4/3 water–hydraulic valve by using a diamond-like-carbon coating

  F. Majdič, I. Velkavrh, M. Kalin, Wear 297(2013) 1016-1024.

• The Effect of Wetting and Surface Energy on the Friction and Slip in Oil-Lubricated Contacts

  M. Kalin, M. Polajnar, Tribology Letters 52 (2013) 185-194.

• Nanoparticles as novel lubricating additives in a green, physically based lubrication technology for DLC coatings

  M. Kalin, J. Kogovšek, M. Remškar, Wear 303 (2013) 480-485.

• Liponucleoside thin films: the special behaviour of guanosine

  L. Čoga, T. Ilc, M. Devetak, S. Masiero, L. Gramigna, G. P. Spada, I. Drevenšek-Olenik, Colloids and Surfaces B: Biointerfaces 103 (2013) 45-51.

• Atomic force microscopy and tribology study of the adsorption of alcohols on diamond-like carbon coatings and steel

  M. Kalin, R. Simič, Applied Surface Science 271 (2013) 317-328.

• A Homodyne Quadrature Laser Interferometer for Micro-Asperity Deformation Analysis

  A. Pogačnik, T. Požar, M. Kalin, J. Možina, Sensors 13 (2013) 703-720.

• “Michael” Nanocarriers Mimicking Transient-Binding Disordered Proteins

  A. Sanchez-Sanchez, S. Akbari, A. Etxeberria, A. Arbe, U. Gasser, A. J. Moreno, J. Colmenero, J. A. Pomposo, ACS macro letters 2 (2013) 491-495.

• The influences of deformation state and experimental conditions on inelastic behaviour of an extruded thermoplastic polyurethane elastomer

  L. Bartolomé, J. Aurrekoetxea, M. A. Urchegui, W. Tato, Materials & Design 49 (2013) 974-980.

• Influence of surface roughness and running-in on the lubrication of steel surfaces with oil containing MoS₂ nanotubes in all lubrication regimes

  J. Kogovšek, M. Remškar, A. Mrzel, M. Kalin, Tribology International 61 (2013) 40-47.

• How to determine the number of asperity peaks, their radii and their heights for engineering surfaces: a critical appraisal

  A. Pogačnik, M. Kalin, Wear 300 (2013) 143-154.

• Comparison of Alcohol and Fatty Acid Adsorption on Hydrogenated DLC Coatings Studied by AFM and Tribological Tests

  R. Simič, M. Kalin, Strojniški Vestnik 59 (2013) 707-718.

• Criteria and properties of the asperity peaks on 3D engineering surfaces

  M. Kalin, A. Pogačnik, Wear 308 (2013) 95-104.

• The correlation between the surface energy, the contact angle and the spreading parameter, and their relevance for the wetting behaviour of DLC with lubricating oils

  M. Kalin, M. Polajnar, Tribology International 66 (2013) 225-233.

• Lubrication of DLC-coated surfaces with MoS₂ nanotubes in all lubrication regimes: Surface roughness and running-in effects

  J. Kogovšek, M. Remškar, M. Kalin, Wear 303 (2013) 361-370.

• Vpliv kombinacije toplotne obdelave, podhlajevanja in nitriranja na tribološke in nosilne lastnosti hitroreznega jekla

  B. Podgornik, V. Leskovšek, J. Jerina, Ventil 19 (2013) 50-55.

• Friction and Lifetime of Laser Surface–Textured and MoS₂-Coated Ti₆Al₄V Under Dry Reciprocating Sliding

  M. Rodríguez Ripoll, R. Simič, J. Brenner, B. Podgornik, Tribology Letters 51 (2013) 261-271.

• Design and Preparation of Single-Chain Nanocarriers Mimicking Disordered Proteins for Combined Delivery of Dermal Bioactive Cargos

  A. Sanchez-Sanchez, S. Akbari, A. J. Moreno, F. Lo Verso, A. Arbe, J. Colmenero, J. A. Pomposo, Macromol. Rapid Commun. 34 (2013) 1681−1686.

• Influence of cooling speed on the microstructure and wear behaviour of hypereutectic Fe–Cr–C hardfacings

  J. Hornung, A. Zikin, K. Pichelbauer, M. Kalin, and M. Kirchgaßner, Materials Science and Engineering: A 576 (2013) 243-251.

• Non-conventional inverse-Stribeck-curve behaviour and other characteristics of DLC coatings in all lubrication regimes

  M. Kalin, I. Velkavrh, Wear 297 (2013) 911-918.

• Experimental characterization and modelling of large-strain visco-elastic behaviour of a thermoplastic polyurethane elastomer

  L. Bartolomé, A. Aginagalde, A. B. Martínez, M. A. Urchegui, W. Tato, Rubber Chemistry and Technology 86 (2013) 146-164.

• Adsorption mechanisms for fatty acids on DLC and steel studied by AFM and tribological experiments

  R. Simič, M. Kalin, Applied Surface Science 283 (2013) 460-470.

2012

• Mechanisms and improvements in the friction and wear behavior using MoS₂ nanotubes as potential oil additives

  M. Kalin, J. Kogovšek, M. Remškar, Wear 280/281 (2012) 36-45.

• Correlation between standard roughness parameters skewness and kurtosis and tribological behaviour of contact surfaces

  M. Sedlaček, B. Podgornik, J. Vižintin, Tribology international 48 (2012) 102-112.

• Pyrrolidinium sulfate and ammonium sulfate ionic liquids as lubricant additives for steel/steel contact lubrication

  V. Pejaković, M. Kronberger, M. Mahrova, M. Vilas, E. Tojo, M. Kalin, Journal of engineering tribology. Part J 226 (2012) 923-932.

• Parameters influencing the running-in and long-term tribological behaviour of polyamide (PA) against polyacetal (POM) and steel

  A. Pogačnik, M. Kalin, Wear 290/291 (2012) 140-148.

• Improvement of ductile iron wear resistance through local surface reinforcement

  B. Podgornik, J. Vižintin, I. Thorbjornsson, B. Johannesson, J. T. Thorgrimsson, M. Martinez Celis, N. Valle, Wear 274/275 (2012) 267-273.

• How anion and cation species influence the tribology of a green lubricant based on ionic liquids

  M. Kronberger, V. Pejaković, C. Gable, M. Kalin, Journal of engineering tribology Part J 226 (2012) 933-951.

• Zmanjšanje izgub znotraj vodnega hidravličnega valja

  F. Majdič, J. Pezdirnik, M. Kalin, Ventil 18 (2012) 284-289.

• Comparison of the effects of the lubricant-molecule chain length and the viscosity on the friction and wear of diamond-like-carbon coatings and steel

  I. Velkavrh, M. Kalin, Tribology International 50 (2012) 57-65.

• Surface topography effect on galling resistance of coated and uncoated tool steel

  B. Podgornik, J. Jerina, Surface & Coatings Technology 206 (2012) 2792-2800.

• Designing Tribological Interface for Efficient and Green DLC Lubrication: The Role of Coatings and Lubricants

  M. Kalin, Tribology Online 7 (2012) 112-118.

2011

• Lead-Free Ferroelectric Potassium Sodium Niobate Thin Films from Solution: Composition and Structure

  A. Kupec, B. Malic, J. Tellier, E. Tchernychova, S. Glinsek, M. Kosec, Journal of the American Ceramic Society , vol. 95, issue 2 (2012) 515-523

• Application of hard coatings for blanking and piercing tools

  B. Podgornik, B. Zajec, N. Bay, J. Vižintin, Wear 270 (2011) 850-856.

• Effect of base oil lubrication in comparison with non-lubricated sliding in diamond-like carbon contacts

  I. Velkavrh, M. Kalin, Tribology: Materials, Surfaces & Interfaces 5 (2011) 53-58.

• Residual stress field analysis and prediction in nitrided tool steel

  B. Podgornik, V. Leskovšek, M. Kovačič, J. Vižintin , Materials and manufacturing processes 26 (2011) 1097-1103.

• Model-based prognostics of gear health using stochastic dynamical models

  M. Gašperin, Đ. Juričić, P. Boškoski, J. Vižintin, Mechanical systems and signal processing 25 (2011) 537-548.

• Dvanajsta mednarodna skandinavska konferenca o fluidni tehniki (SICFP\'11)

  F. Majdič, Ventil 17 (2011) 208-209.

• Experimental validation of the lifetime performance of a proportional 4/3 hydraulic valve operating in water

  F. Majdič, J. Pezdirnik, M. Kalin, Tribology international 44 (2011) 2013-2021.

• Influence of elastic deformation on the pressure distribution in textured surfaces

  M. Rodríguez Ripoll, V. G. Marian, B. Podgornik, J. Vižintin, Tribologia 30 (2011) 29-36.

• Finite element analysis of textured surfaces under reciprocating sliding

  M. Rodríguez Ripoll, B. Podgornik, J. Vižintin, Wear 271 (2011) 952-959.

• Model-based prognostics of gear health using stochastic non-linear dynamical models

  M. Gašperin, Đ. Juričić, P. Boškoski, J. Vižintin, International Journal of Condition Monitoring 1 (2011) 67-78.

• Surface topography modelling for reduced friction

  M. Sedlaček, L. M.S. Vilhena, B. Podgornik, J. Vižintin, Strojniški vestnik 57 (2011) 674-680.

• Advances in boundary lubrication and boundary surface films

  M. Kalin, F. Gutierrez Mora, Tribology International 44 (2011) 669.

• Influence of texturing parameters and contact conditions on tribological behaviour of laser textured surfaces

  L.M. Vilhena, B. Podgornik, J. Vižintin, J. Možina, Meccanica 46 (2011) 567-575.

2010

• Effect of different production phases on residual stress field in double-layer cast rolls

  B. Podgornik, S. Milanović, J. Vižintin, Journal of materials processing technology, 210 (2010) 1083–1088.

• Real contact temperatures as the criteria for the reactivity of diamond-like carbon coatings with oil additives

  M. Kalin, J. Vižintin, Thin Solid Films 518 (2010) 2029–2036.

• Special issue on some current trends in improving boundary lubrication (editorial)

  M. Kalin, B, Piccigallo, Lubrication Science 22 (2010) 207–208.

• Metal-doped (Ti, WC) diamond-like-carbon coatings: Reactions with extreme-pressure oil additives under tribological and static conditions

  M. Kalin, E. Roman, L. Ožbolt, J. Vižintin, Thin Solid Films 518 (2010) 4336–4344.

• Primerjava delovanja vodne in oljne pogonsko-krmilne hidravlike

  F. Majdič, J. Pezdirnik, M. Kalin, Ventil 16 (2010) 520–527.

• Action of oil additives when used in DLC coated contacts

  B. Podgornik, J. Vižintin, Tribology-Materials, Surfaces & Interfaces, 4 (2010) 186–190.

• Oil- and water-based continuous control valve

  F. Majdič, J. Pezdirnik, Industrial Lubrication and Tribology 62 (2010) 136–143.

• Tribološko ponašanje biljnih ulja

  B. Kržan, B. Čeh, I. J. Košir, J. Vižintin, Goriva i maziva 49 (2010) 352–367.

• Editorial : special issue on some current trends in improving boundary lubrication

  M. Kalin, B. Piccigallo, Lubrication Science 22 (2010) 207–208.

2009

• Razvojno preizkušanje vodnega zvezno delujočega drsniškega potnega ventila

  F. Majdič, J. Pezdirnik, M. Kalin, Ventil 15 (2009) 516–524.

• Tribology for engines and transmissions : editorial

  M. Kalin, P. Kapsa, Tribology International 42 (2009) 511.

• The influence of viscosity on the friction in lubricated DLC contacts at various sliding velocities

  I. Velkavrh, M. Kalin, J. Vižintin, Tribology International 42 (2009) 1752–1757.

• Biodizel - osnovne značilnosti

  B. Kržan, J. Vižintin, Oljnice: pridelava, kakovost olja ter možnost uporabe za biomaziva in biodizel. (2009) 115-116.

• Transportna politika in biogoriva v Sloveniji

  B. Kržan, J. Vižintin, Oljnice: pridelava, kakovost olja ter možnost uporabe za biomaziva in biodizel. (2009) 125–131.

• Tribological behavior of tungsten-doped DLC coating under oil lubrication

  B. Kržan, F. Novotny-Farkas, J. Vižintin, Tribology International 42 (2009) 229–235.

• The Stribeck curve and lubrication design for non-fully wetted surfaces

  M. Kalin, I. Velkavrh, J. Vižintin, Wear 267 (2009) 1232–1240.

• Influence of surface preparation on roughness parameters, friction and wear

  M. Sedlaček, B. Podgornik, J. Vižintin, Wear 266 (2009) 482–487.

• SWOT analiza proizvodnje in uporabe biodizla

  B. Kržan, J. Vižintin, Oljnice: pridelava, kakovost olja ter možnost uporabe za biomaziva in biodizel. (2009) 117–124.

• Okolju prilagojena maziva

  B. Kržan, J. Vižintin, Ventil 15 (2009) 232–238.

• Mazalne lastnosti rastlinskih olj

  B. Kržan, J. Vižintin, Oljnice: pridelava, kakovost olja ter možnost uporabe za biomaziva in biodizel. (2009) 101–114.

• Influence of deep-cryogenic treatment on tribological properties of P/M high-speed steel

  B. Podgornik, V. Leskovšek, J. Vižintin, Materials and manufacturing processes 24 (2009) 734–738.

• Optimization of oil-hydraulic cylinders of large measurements and high output power

  R. S. Petrović, J. Pezdirnik, N. Todić, Ventil 15 (2009) 330–337.

• Influence of lubricant chemistry on friction and wear of W doped DLC coating

  B. Kržan, F. Novotny-Farkas, J. Vižintin, Tribologie und Schmierungstechnik, 56 (2009) 38–41.

2008

• Tribological interactions between DLC coatings and lubricants

  B. Podgornik, J. Vižintin, S. Strnad, K. Stana-Kleinschek, Tribotest 14 (2008) 81–95.

• Rolling and rolling-to-sliding contact failure mechanics of diamond like coatings

  M. Kalin, Triboscience and tribotechnology superior friction and wear control in engines and transmissions (2008) 207-211.

• Analysis of the long-term performance and tribological behavior of an axial piston pump using diamondlike-carbon-coated piston shoes and biodegradable oil

  M. Kalin, F. Majdič, J. Vižintin, J. Pezdirnik, I. Velkavrh, Journal of Tribology 130 (2008) 11013-11021.

• Tribološko ponašanje zupčanika s volfram-DLC prevlakom

  B. Kržan, M. Kalin, J. Vižintin, Goriva i maziva 47 (2008) 281–298.

• Advances in water power-control hydraulics experimental research

  F. Majdič, J. Pezdirnik, Strojniški vestnik 54 (2008) 841–849.

• Review of boundary lubrication mechanisms of DLC coating used in mechanical applications

  M. Kalin, I. Velkavrh, J. Vižintin, L. Ožbolt, Meccanica 43 (2008) 623–637.

• The analysis of complex tribological system of single point incremental sheet metal forming - SPIF

  A. Petek, B. Podgornik, K. Kuzman, M. Čekada, W. Waldhauser, J. Vižintin, Strojniški vestnik 54 (2008) 266–273.

• The performance and mechanisms of DLC-coated surfaces in contact with steel in boundary-lubrication conditions : a review

  I. Velkavrh, M. Kalin, J. Vižintin, Strojniški vestnik 54 (2008) 189–206.

• Tribochemistry in sliding wear of TiCN-Ni-based cermets

  B.V. Manoj Kumar, B. Bikramjit, J. Vižintin, M. Kalin, Journal of materials research 23 (2008) 1214–1227.

• Compatibility of DLC coatings with formulated oils

  B. Podgornik, M. Sedlaček, J. Vižintin, Tribology International 41 (2008) 564–570.

• Tribological properties of DLC coatings and comparison with test results : development of a database

  M. Sedlaček, B. Podgornik, J. Vižintin, Materials Characterization 59 (2008) 151–161.

2007

• Mazanje ležajev z zrakom : manj trenja pomeni manj izgub

  J. Vižintin, Delo 49 (2007) 17.

• Evropska konferenca o tribologiji - ECOTRIB 2007

  B. Podgornik, J. Vižintin, Ventil 13 (2007) 216.

• The effect of residual stresses in functionally graded alumina-ZTA composites on their wear and friction behaviour

  S. Novak, M. Kalin, P. Lukas, G. Anne, J. Vleugels, O. Van der Biest, Journal of the European Ceramic Society 27 (2007) 151–156.

• The effect of temperature on the tribological mechanisms and reactivity of hydrogenerated, amorphous diamond-like carbon coatings under oil-lubricated conditions

  M. Kalin, E. Roman, J. Vižintin, Thin Solid Films 515 (2007) 3644–3652.

• Evropska konferenca o tribologiji - ECOTRIB 2007 : poročila

  J. Vižintin, Strojniški vestnik 53 (2007) 348.

• Comparative tribological investigations of continuous control valves for water hydraulics

  F. Majdič, J. Pezdirnik, M. Kalin , Ventil 13 (2007) 310–316.

• Tribološke lastnosti oplaščenih strojnih delov

  B. Podgornik, J. Vižintin, IRT 3000 2 (2007) 94–101.

• Load-dependent transition in sliding wear properties of TiCN-WC-Ni cermets

  B.V. Manoj Kumar, B. Bikramjit, M. Kalin, J. Vižintin, Journal of the American Ceramic Society 90 (2007) 1534–1540.

2006

• Designing systems of power control hydraulics for condition based maintenance

  J. Pezdirnik, Ventil 12 (2006) 76–80.

• Voda kot hidravlična tekočina v pogonsko-krmilni hidravliki - 1. del

  F. Majdič, J. Pezdirnik, M. Kalin, Ventil 12 (2006) 178–184.

• Improvement in galling performance through surface engineering

  B. Podgornik, J. Vižintin, S. Hogmark, Surface engineering 22 (2006) 235–238.

• The tribological performance of DLC coatings under oil-lubricated fretting conditions

  M. Kalin, J. Vižintin, Tribology international 39 (2006) 1060–1067.

• Differences in the tribological mechanisms when using non-doped, metal-doped (Ti, WC), and non-metal-doped (Si) diamond-like carbon against steel under boundary lubrication, with and without oil additives

  M. Kalin, J. Vižintin, Thin Solid Films 515 (2006) 2734–2747.

• Voda kot hidravlična tekočina v pogonsko-krmilni hidravliki - 2. del

  F. Majdič, J. Pezdirnik, M. Kalin, Ventil 12 (2006) 238–245.

• The lubrication of DLC coated gears with environmentally adapted ester-based oil

  B. Kržan, M. Kalin, J. Vižintin, Gear technology 23 (2006) 36–40.

• Application of hole-drilling method in practice

  B. Podgornik, J. Vižintin, F. Kopač, Materials science forum 524/525 (2006) 555–560.

• Influence of deep-cryogenic treatment on wear resistance of vacuum heat-treated HSS

  V. Leskovšek, M. Kalin, J. Vižintin, Vacuum 80 (2006) 507–518.

• Wear mechanisms associated with the lubrication of zirconia ceramics in various aqueous solutions

  M. Kalin, G. Dražić, S. Novak, J. Vižintin, Journal of the European Ceramic Society 26 (2006) 223–232.

• Designing hydraulic power systems for condition based maintenance

  J. Pezdirnik, Maintenance journal 19 (2006) 52–55.

• Surface properties of lubricants and hard coatings as predictors of frictional behaviour under boundary lubrication

  S. Strnad, B. Podgornik, K. Stana-Kleinschek, J. Vižintin, Materials research innovations 10 (2006) 284–298.

• A comparison of the tribological behaviour of steel/steel, steel/DLC and DLC/DLC contact when lubricated with mineral and biodegradable oils

  M. Kalin, J. Vižintin, Wear 261 (2006) 22–31.

• Wear behaviour of deep-cryogenic treated high-speed steels at different loads

  M. Kalin, V. Leskovšek, J. Vižintin, Materials and manufacturing processes 21 (2006) 741–746.

• Surface charge as a new concept for boundary lubrication of ceramics with water

  M. Kalin, S. Novak, J. Vižintin, Journal of Physics 39 (2006) 3138–3149.

• Tribološka svojstva maziva iz obnovljivih izvora

  B. Kržan, J. Vižintin, Goriva i maziva 45 (2006) 293–313.

• Tribological performance of titanium doped and pure DLC coatings combined with a synthetic bio-lubricant

  J. Barriga, M. Kalin, K. Van Acker, K. Vercammen, A. Ortega, L. Leiaristi, Wear 261 (2006) 9–14.

• Combination of DLC coatings and EP additives for improved tribological behaviour of boundary lubricated surfaces

  B. Podgornik, D. Hren, J. Vižintin, S. Jacobson, N. Stavlid, S. Hogmark, Wear 261 (2006) 32–40.

2005

• The tribological performance of DLC-coated gears lubricated with biodegradable oil in various pinion/gear material combinations

  M. Kalin, J. Vižintin, Wear 259 (2005) 1270–1280.

• Wear mechanisms of glass-infiltrated alumina sliding against alumina in water

  M. Kalin, S. Jahanmir, G. Dražić, Journal of the American Ceramic Society 88 (2005) 346–352.

• Vzdrževanje hidravličnih naprav v Lesni industriji Kočevje

  J. Pezdirnik, B. Pakiž, Ventil 11 (2005) 25–29.

• Vzdrževanje naprav pogonsko-krmilne hidravlike v okviru evropskega standarda EN 13306

  J. Pezdirnik, Ventil 11 (2005) 237–241.

• Structural changes in ZrO₂ ceramics during sliding under various environments

  S. Novak, G. Dražić, M. Kalin, Wear 259 (2005) 562–568.

• Biolubricants for deep-drawing

  B. Kržan, J. Vižintin, Biodegradable lubricants (2005) V.1-V.6.

• Development and use of an apparatus for tribological evaluation of ceramic-based brake materials

  M. Kermc, M. Kalin, J. Vižintin, Wear 259 (2005) 1079–1087.

• Tribological reactions between oil additives and DLC coatings for automotive applications

  B. Podgornik, J. Vižintin, Surface & Coatings Technology 200 (2005) 1982–1989.

• Low-friction behaviour of boundary-lubricated diamond-like carbon coatings containing tungsten

  B. Podgornik, D. Hren, J. Vižintin, Thin Solid Films 476 (2005) 92–100.

• Diagnosticiranje poškodb strojnih elementov s ferografijo : diagnosticiranje poškodb

  J. Vižintin, B. Kržan, Vzdrževalec 107 (2005) 41–42.

2004

• Preventivno vzdrževanje hidravličnih naprav glede na stanje

  J. Pezdirnik, Vzdrževalec 101 (2004) 48–50.

• Microstructure, mechanical properties and wear behaviour of deep-cryogenic-treated HSS

  V. Leskovšek, M. Kalin, J. Vižintin, Transactions of Heat Treatment and Heat Treatment 25 (2004) 540–545.

• Influence of flash temperatures on the tribological behaviour in low-speed sliding : a review

  M. Kalin, Materials Science & Engineering 374 (2004) 390–397.

• On the evaluation of thermal and mechanical factors in low-speed sliding

  M. Kalin, Tribology of mechanical systems: a guide to present and future technologies (2004) 205–217.

• The effect of pH on the wear of water-lubricated alumina and zirconia ceramics

  S. Novak, M. Kalin, Tribology Letters 17 (2004) 727–732.

• Tribo-electro-chemical effects in water lubrication of ceramics

  M. Kalin, S. Novak, J. Vižintin, Current trends in tribology (2004) I.21–I.29

• The effect of doping elements and oil additives on the tribological performance of boundary-lubricated DLC/DLC contacts

  M. Kalin, J. Vižintin, J. Barriga, K. Vercammen, K. Van Acker, A. Arnšek, Tribology Letters 17 (2004) 679–688.

• Ko maziva ne bodo več potrebna : tribologija, najmlajša strojniška stroka

  J. Vižintin, Delo 46 (2004) 18.

• Comparison between different test methods for evaluation of galling properties of surface engineered tool surfaces

  B. Podgornik, S. Hogmark, J. Pezdirnik, Wear 257 (2004) 843–851.

• Tribological behaviour of WC/C coatings operating under different lubrication regimes

  B. Podgornik, J. Vižintin, S. Jacobson, S. Hogmark, Surface & Coatings Technology 177/178 (2004) 558–565.

• Preventivno vzdrževanje hidravličnih naprav

  J. Pezdirnik, Ventil 10 (2004) 163–165.

• A rolling-contact device that uses the ball-on-flat testing principle

  M. Kalin, J. Vižintin, Wear 256 (2004) 335–341.

• Advantages of using the ball-on-flat device in rolling-contact testing of ceramics

  M. Kalin, J. Vižintin, Journal of the European Ceramic Society 24 (2004) 11–15.

• Tribological behaviour of DLC coatings in combination with biodegradable lubricants

  K. Vercammen, K. Van Acker, A. Vanhulsel, J. Barriga, A. Arnšek, M. Kalin, J. Meneve, Tribology International 37 (2004) 983–989.

• Ester based lubricants deriwed from renewable resources

  B. Kržan, J. Vižintin, Tribology in Industry 26 (2004) 58–62.

• Use and development of biodegradable oils

  B. Kržan, J. Vižintin, Tribology of mechanical systems: a guide to present and future technologies (2004) 107–137.

• Expert systems in condition monitoring

  J. Vižintin, Tribology of mechanical systems: a guide to present and future technologies (2004) 279–292.

• Combining biolubricants and low friction coatings

  K. Vercammen, K. V Acker, J. Barriga, E. Fuentes, M. Kalin, J. Vižintin, Current trends in tribology (2004) I.1–I.4.

• Oil surface : additive reaction mechanisms

  J. Vižintin, Surface modification and mechanisms: friction, stres, and reaction engineering (2004) 243–298.

• Temperaturne razmere v dotikih z jeklenimi in kompozitnimi zavornimi diski C/C-SiC

  M. Kermc, Z. Stadler, M. Kalin, Strojniški vestnik 50 (2004) 346–359.

2003

• Uporaba trdih prevlek PVD v strojništvu - možnosti in omejitve

  B. Podgornik, J. Vižintin, Strojniški vestnik 49 (2003) 242–249.

• Wear and friction behavior of alumina ceramics in aqueous solutions with different pH

  M. Kalin, S. Novak, J. Vižintin, Wear 254 (2003) 1141–1146.

• Wear resistance of plasma and pulse plasma nitrided gears

  B. Podgornik, J. Vižintin, Gear technology 20 (2003) 33–37.

• Friction and wear behaviour of SiAlON ceramics under fretting contacts

  B. Bikramjit, J. Vleugels, M. Kalin, O. Van der Biest, Materials Science & Engineering 359 (2003) 228–236.

• Tribological properties of an environmentally adopted universal tractor transmission oil based on vegetable oil

  B. Kržan, J. Vižintin , Tribology International 36 (2003) 827–833.

• Influence of roughness on wear transition in glass-infiltrated alumina

  M. Kalin, S. Jahanmir, Wear 255 (2003) 669–676

• Vegetable-based oil as a gear lubricant

  B. Kržan, J. Vižintin, Gear technology 20 (2003) 28–33.

• Evropski virtualni tribološki inštitut - VTI

  R. Korbee, J. Vižintin, B. Podgornik, Strojniški vestnik 49 (2003) 127–129.

• Wear of hydroxyapatite sliding against glass-infiltrated alumina

  M. Kalin, B. Hockey, S. Jahanmir, Journal of Materials Research 18 (2003) 27–36.

• Znanja ne znamo tržiti : prof. dr. Jože Vižintin, letošnji Zoisov nagrajenec, vodilni strokovnjak na področju vede o trenju

  J. Vižintin, Sobota 7 (2003) 15

2002

• Novo biorazgradljivo univerzalno zupčaničko ulje za traktore na osnovi biljnog ulja

  B. Kržan, J. Vižintin, Goriva i maziva 41 (2002) 199–225.

• Slotrib 02 : posvetovanje o pogonskih in alternativnih gorivih, tribologiji in ekologiji (21.-22.11.2002, Portorož) : poročila

  B. Podgornik, J. Vižintin, J. Bedenk, R. Glavina, Strojniški vestnik 48 (2002) 638–639.

• Vpliv mazalnih razmer na tribološko vedenje materialov tesnilnih obročev v mehanskih drsnih tesnilih

  A. Vezjak, J. Vižintin, Materiali in tehnologije 36 (2002) 43–47.

• Izračun kontaktnih temperatur z več različnimi modeli

  M. Kalin, J. Vižintin, Materiali in tehnologije 36 (2002) 187–192.

• An approach to practical reliability improvement

  M. Trstenjak, J. Vižintin, Maintenance & Asset Management 17 (2002) 5–9.

• Effect of counterface roughness on abrasive wear of hydroxyapatite

  M. Kalin, S. Jahanmir, L. K. Ives, Wear 252 (2002) 679–685.

• Rolling contact properties of ta-C coated low alloy steel

  B. Podgornik, J. Vižintin, Surface & Coatings Technology 157 (2002) 257–261.

• Tribology of thin films and their use in the field of machine elements

  B. Podgornik, J. Vižintin, Vacuum 68 (2002) 30–47.

2001

• Obrabna odpornost konstrukcijskega jekla, nitriranega v plazmi

  B. Podgornik, J. Vižintin, V. Leskovšek, Strojniški vestnik 47 (2001) 163–173

• Tok tekočine skozi reže v hidravličnih sestavinah : (tok kapljevine skozi reže med soležnimi vzporednimi ploskvami brez medsebojne relativne hitrosti)

  J. Pezdirnik, Strojniški vestnik 47 (2001) 210–216.

• Experimental study on the relationship between lubrication regime and the performance of mechanical seals

  A. Vezjak, J. Vižintin, Lubrication Engineering 57 (2001) 17–22.

• Pitting resistance of rapeseed-based oils

  A. Arnšek, J. Vižintin, Lubrication Engineering 57 (2001) 17–21.

• Tribological properties of plasma nitrided and hard coated AISI 4140 steel

  B. Podgornik, J. Vižintin, O. Wänstrand, M. Larsson, S. Hogmark, H. Ronkainen, K. Holmberg, Wear 249 (2001) 254–259.

• Chemical aspects of wear of alumina ceramics

  S. Novak, M. Kalin, T. Kosmač, Wear 250 (2001) 318–321.

• Vpliv kemotermične obdelave podlage na tribološke lastnosti trdih prevlek

  B. Podgornik, J. Vižintin, Strojniški vestnik 47 (2001) 152–162.

• Primerjava triboloških lastnosti mineralnih in repičnih mazalnih olj- Rezultati fizikalno-kemijskih analiz (3. del)

  A. Arnšek, A. Udovč, J. Vižintin, Strojniški vestnik 47 (2001) 217–225.

• Država še ne ve, kaj naj počne z znanostjo : pogovarjali smo se z letošnjimi Zoisovimi nagrajenci

  M. Ramovš, D. Mihailović, J. Vižintin, D. Marušič, Delo 44 (2001) 8–10 [priloga Znanost].

• New biodegradable universal tractor transmission oil based on rapeseed oil

  J. Vižintin, Tribology: scientific final report, VTT Manufacturing Technology (2001) 90–95.

• Structural stability of duplex stainless steels

  B. Kržan , Kovové materiály 39 (2001) 338–348.

• High temperature phase transformations under fretting conditions

  M. Kalin and J. Vižintin, Wear 249 (2001) 172–181.

• Primerjava triboloških lastnosti mineralnih in repičnih mazalnih olj - osnove, načini preskušanja ter izbira preskusnih olj (1. del)

  J. Vižintin, A. Arnšek, Strojniški vestnik 47 (2001) 140–146.

• Influence of substrate treatment on the tribological properties of DLC coatings

  B. Podgornik, J. Vižintin , Diamond and related materials 10 (2001) 2232–2237.

• A tentative explanation for the tribochemical effects in fretting wear

  M. Kalin, J. Vižintin, Wear 250 (2001) 681–689.

• Comparison of different theoretical models for the flash temperature calculation under fretting conditions

  M. Kalin, J. Vižintin, Tribology International 34 (2001) 831–839.

• W. J. Bartz in 9 soavtorjev: Shaden an geschmierten Mashinenelementen (Gleitlager, Walzlager, Zahnräder) : ocena knjige

  J. Vižintin, Strojniški vestnik 47 (2001) 109.

• Mathias Woydt in 12 soavtorjev: Tribologie keramischer Werkstoffe : ocena knjige

  M. Kalin, Strojniški vestnik 47 (2001) 336.

• Wear resistance of pulse plasma nitrided AISI 4140 and A355 steels

  B. Podgornik, J. Vižintin, Materials Science & Engineering 315 (2001) 28–34.

• Microstructural changes and contact temperatures during fretting in steel-steel contact

  B. Podgornik, M. Kalin, J. Vižintin, F. Vodopivec, Journal of Tribology 123 (2001) 670–675.

• Schmierstoff-Tabelle : ocena knjige

  B. Kržan, Strojniški vestnik 47 (2001) 187.

• Sliding and pitting wear resistance of plasma and pulse plasma nitrided steel

  B. Podgornik, J. Vižintin, Surface Engineering 17 (2001) 300–304.

• Izračun kontaktnih temperatur v fretinških razmerah

  M. Kalin, J. Vižintin, Strojniški vestnik 47 (2001) 129–139.

2000

• Tribološke lastnosti jekla nitriranega v plazmi in prekritega z DLC-prevleko

  B. Podgornik, J. Vižintin, V. Leskovšek, H. Ronkainen, K. Holmberg, Materiali in tehnologije 34 (2000) 375–379.

• Changes in maintenance program at ironworks in Slovenia

  M. Trstenjak, J. Vižintin, J. Cerkovnik, Maintenance Journal 13 (2000) 42–45.

• Lubricating properties of rapeseed oils compared to mineral oils under a high load oscillating movement

  J. Vižintin, A. Arnšek, A. Ploj, Journal of Synthetic Lubrication 17 (2000) 201–217.

• Influence of mechanical pressure and temperature on the chemical interaction between steel and silicon nitride ceramics

  M. Kalin, J. Vižintin, J. Vleugels, O. Van Der Biest, Journal of Materials Research 15 (2000) 1367–1376.

• Tribological properties of plasma nitrided AISI 4140 steel under dry and lubricated sliding conditions

  B. Podgornik, J. Vižintin, Tribotest 6 (2000) 357–371.

• Wear resistance of DLC coating deposited on pretreated AISI 4140 steel

  B. Podgornik, J. Vižintin, H. Ronkainen, K. Holmberg, Advanced Engineering Materials 2 (2000) 444–448.

• Rapidly biodegradable hydraulic fluids on the basis of rapeseed oil

  R. Šraj, J. Vižintin, M. Svoljšak, M. Feldin, Lubrication Eengineering 56 (2000) 34–39.

• Računalniško krmiljeno preizkuševališče za raziskavo materialov mehanskih drsnih tesnil

  A. Vezjak, J. Vižintin, Materiali in tehnologije 34 (2000) 99–102.

• Lubricating properties of rapeseed-based oils

  A. Arnšek, J. Vižintin, Journal of Synthetic Lubrication 16 (2000) 281–296.

• Protiobrabne lastnosti jekla 42CrMo4 nitriranega v plazmi in prekritega s trdo zaščitno prevleko

  B. Podgornik, J. Vižintin, V. Leskovšek, O. Wänstrand, M. Larsson, S. Hogmark, Materiali in tehnologije 34 (2000) 17–21.

• Chemical reactivity of silicon nitride with steel and oxidised steel between 500 and 1200°C

  M. Kalin, J. Vižintin, J. Vleugels, O. Van Der Biest, Materials Science & Engineering 281 (2000) 28–36.

• Sliding wear characteristics of induction hardened, conventional plasma nitrided and pulse plasma nitrided steels : project technical report

  J. Vižintin, B. Podgornik, Tribology (2000) 196–200.

• Parameter PV_lim kot merilo za ovrednotenje materialov tesnilnih obročev v mehanskih drsnih tesnilih

  A. Vezjak, J. Vižintin, M. Oberžan, Materiali in tehnologije 34 (2000) 143–146.

• D.Tornau in 3 soavtorji: Kühlschmierstoffe und Anlagen : ocena knjige

  J. Vižintin, Strojniški vestnik 46 (2000) 653.

• Brzo biorazgradljive hidrauličke tekućine na osnovi repična ulja

  R. Šraj, M. Svoljšak, M. Feldin, J. Vižintin, Goriva i maziva 39 (2000) 3–11 (hrv) in 11-23 (eng).

• Friction and wear properties of DLC-coated plasma nitrided steel in unidirectional and reciprocating sliding

  B. Podgornik, J. Vižintin, H. Ronkainen, K Holmberg, Thin Solid Films 377/378 (2000) 254–260.

• Novo biorazgradljivo splošno traktorsko transmisijsko olje na osnovi oljne repice

  A. Ploj, B. Kržan, J. Bedenk, M. Feldin, Strojniški vestnik 46 (2000) 291–301.

• Use of equations for wear volume determination in fretting experiments

  M. Kalin, J. Vižintin, Wear 237 (2000) 39–48.

1999

• Scuffing load capacity of rapeseed-based oils

  A. Arnšek, J. Vižintin, Lubrication Engineering 55 (1999) 11–18.

• E.Kleinlein und 7 Mitautoren: Einsatz von Wälzlagern bei extremen Betriebs- und Umgebungsbedingungen : ocena knjige

  M. Kalin, Strojniški vestnik 45 (1999) 38.

• Wear and friction behaviour of duplex-treated AISI 4140 steel

  B. Podgornik, J. Vižintin, O. Wänstrand, M. Larsson, S. Hogmark, Surface & Coatings Technology 120/121 (1999) 502–508.

• Primeri fretinga v sodobnih strojih in napravah

  M. Kalin, J. Vižintin, Strojniški vestnik 45 (1999) 185–198.

• Temperatures at the interface and inside an oscillatory sliding microcontact - theoretical part

  J. Pezdirnik, J. Vižintin, B. Podgornik, Tribology International 32 (1999) 481–489.

• Wear properties of induction hardened, conventional plasma nitrided and pulse plasma nitrided AISI 4140 steel in dry sliding conditions

  B. Podgornik, J. Vižintin, V. Leskovšek, Wear 232 (1999) 231–242.

• Protiobrabne lastnosti jekla 42CrMo₄, nitriranega v nepulzirajoči in pulzirajoči plazmi

  B. Podgornik, J. Vižintin, V. Leskovšek, Kovine zlitine tehnologije 33 (1999) 51–54.

• Wear properties of plasma nitrided steel in dry conditions

  B. Podgornik, J. Vižintin, Journal of Tribology 121 (1999) 802–807.

• Freting

  J. Vižintin, M. Kalin, Kovine zlitine tehnologije 33 (1999) 55–59.

• Tribološke lastnosti jekla AISI 4140 nitriranega v plazmi in pulzirajoči plazmi

  B. Podgornik, J. Vižintin, V. Leskovšek, Strojniški vestnik 45 (1999) 199–209.

• Interactions in silicon nitride ceramics vs. steel contact under fretting conditions

  S. Novak, G. Dražić, M. Kalin, J. Vižintin, Wear 225/229 (1999) 1276–1283.

1998

• Fluidna tehnika in mehatronika v Sloveniji in Evropi : okrogla miza

  W. Backé, N. Herakovič, J. Peklenik, A. Stušek, D. Noe, M. Skubic, J. Pezdirnik, D. Kajfež, A. Marolt, E. Detiček, A. Burjek, Ventil 4 (1998) 188–195.

• H. Jünemann und 4 Mitautoren: Tribometrie : ocena knjige

  J. Vižintin, Strojniški vestnik 44 (1998) 270.

• Tribological properties of plasma and pulse plasma nitrided AISI 4140 steel

  B. Podgornik, J. Vižintin, V. Leskovšek, Surface & Coatings Technology 108/109 (1998) 454–460.

• Preskušanje materialov na odpornost proti utrujanju pri kotaljenju

  M. Kalin, J. Vižintin, Kovine zlitine tehnologije 32 (1998) 91–94.

• Laboratories at work: tribology and technical diagnostics at the University of Ljubljana, Slovenia

  J. Vižintin, Tribotest 4 (1998) 441–451.

• Temperatura in spremembe mikrostrukture v oscilatornem mikrokontaktu, segretem zaradi trenja

  J. Pezdirnik, J. Vižintin, F. Vodopivec, A. Rodič, Kovine zlitine tehnologije 32 (1998) 305–308.

1997

• Možnost uporabe modificirane naprave valjček - plošča pri preizkušanju hladilno-mazalnih emulzij

  A. Arnšek, J. Vižintin, Strojniški vestnik 43 (1997) 103–116.

• Wear mechanisms in oil-lubricated and dry fretting of silicon nitride against bearing steel contacts

  M. Kalin, J. Vižintin, S. Novak, G. Dražić, Wear 210 (1997) 27–38.

• Comparison of the fretting wear of 100Cr6/100Cr6, Si₃N₄/Si₃N₄ and Si₃N₄/100Cr6 contacts in lubricated and dry conditions

  J. Vižintin, M. Kalin, B. Podgornik, S. Novak, Lubrication Science 9 (1997) 391–408.

• Razmere v režah hidravličnih ventilov

  J. Pezdirnik, Vzdrževalec 60 (1997) 33–35.

• Petrol Biolub 46 - nov proizvod na tržišču

  R. Šraj, J. Vižintin, B. Jager, Petrol (1997) 1–4.

• Računalniško simuliranje delovanja krogličnih ležajev

  M. Kalin, J. Vižintin, Strojniški vestnik 43 (1997) 248–257.

• Novi koncepti hidravličnih naprav za viličarje v Tovarni viličarjev Litostroj

  J. Pezdirnik , Ventil 3 (1997) 45–46.

• Vpliv dodatkov QMI, PRO MOTION in SKORPION na lastnosti motornih olj v drsnem dotiku

  A. Arnšek, J. Vižintin, Strojniški vestnik 43 (1997) 160–166.

• Petrol Biolub 46 - nov proizvod na tržišču

  B. Jager, R. Šraj, J. Vižintin, Ventil 3 (1997) 75–78.

1996

• Temperatura in temperaturni gradient med fretting preizkusom 1 % C in 1.5 % Cr jekla

  F. Vodopivec, J. Vižintin, Kovine zlitine tehnologije 30 (1996) 9–14.

• Three-body contact temperature in fretting conditions

  J. Pezdirnik, B. Podgornik, J. Vižintin, M. Kalin, F. Vodopivec, The third body concept: interpretation of tribological phenomena (1996) 257–270.

• Effect of fretting conditions on the wear of silicon nitride against bearing steel

  M. Kalin, J. Vižintin, S. Novak, Materials Science & Engineering 220 (1996) 191–199.

• Nove smeri razvoja hidravličnih fluidov

  R. Šraj, J. Vižintin, Petrol 1 (1996) 1–4.

• Procjena u vodi topljivih tekućina za rezanje putem modificiranog ispita iglom na disku

  A. Arnšek, J. Vižintin, Goriva i maziva 35 (1996) 65–88.

• Wear of silicon nitride ceramics under fretting conditions

  S. Novak, G. Dražić, Z. Samardžija, M. Kalin, J. Vižintin, Materials Science & Engineering 215 (1996) 125–133.

• The effect of slip amplitude and test time on fretting wear in metal-metal contact

  J. Vižintin, M. Kalin, B. Podgornik, F. Vodopivec, Tribotest 3 (1996) 149–165.

• Biološko razgradljivi hidravlični fluidi

  R. Šraj, J. Vižintin, Ventil 2 (1996) 40–46.

• Fretting wear of silicon nitride against bearing steel contacts in lubricated and dry conditions

  M. Kalin, J. Vižintin, S. Novak, Tribologia 15 (1996) 42–60.

• Effect of slip amplitude on the fretting wear of silicon nitride against silicon nitride

  J. Vižintin, M. Kalin, S. Novak, G. Dražić, L.K. Ives, M.B. Peterson, Wear 192 (1996) 11-20.

• Preizkušanje biološko razgradljivega hidravličnega fluida na osnovi repičnega olja - Petrol Biolub 46

  R. Šraj, J. Vižintin, Petrol 16 (1996) 1–2.

• Okrogla miza : izobraževanje - hidravlični fluidi - ponudba hidravlične opreme v Sloveniji in druga vprašanja

  J. Pezdirnik, Ventil 2 (1996) 53–57.

• Uporaba dodatkov QMI*, PRO MOTION* in SKORPION* v komercialnih motornih oljih

  A. Arnšek, J. Vižintin, Petrol: časopis družbe Petrol 5 (1996) 1–4.

• Effect of fretting amplitude on microstructure of 1C-1.5Cr steel

  F. Vodopivec, J. Vižintin, B. Šuštaršič, Materials Science and Technology 12 (1996) 355–360.

1995

• Application ow wear particle analysis to condition monitoring of rotating machinery in iron and steel works

  J. Vižintin, M. Kambič, I. Lipušček, V. Hudnik, Lubrication Engineering 51 (1995) 389–393.

1994

• Primerjalno preizkušanje obrabne obstojnosti orodnih jekel

  J. Vižintin, E. Tomšič, F. Uranc, F. Grešovnik, J. Šegel, Kovine zlitine tehnologije 28 (1994) 57–68.

• W. J. Bartz: Tribological relationship as basis for the solution of friction and wear probleme : ocena knjige

  J. Vižintin, Strojniški vestnik 40 (1994) 287.

• K.H. Habig in soavtorji: Tribologischen Verhalten keramischer Werkstoffe : ocena knjige

  J. Vižintin, Strojniški vestnik 40 (1994) 169.

1993

• Obraba jekla 100 Cr6 pri majhnih oscilacijah

  J. Vižintin, F. Vodopivec, Kovine zlitine tehnologije 27 (1993) 185–190.

• Izbira dodajnega materiala in tehnologije navarjanja tekalnega kolesa žerjava : tehnične novice

  R. Kejžar, M. Hrženjak, V. Živkovič, J. Vižintin, L. Kosec, J. Cankar, P. Žmitek, Kovine zlitine tehnologije 27 (1993) 267.

1992

• Razvoj in pomen tribologije doma in v svetu

  J. Vižintin, Kovine zlitine tehnologije 26 (1992) 41–48.

1991

• Spremljanje obrabe elementov strojev z analizo obrabnih delcev

  M. Kambič, J. Vižintin, V. Hudnik, I. Lipušček, Strojniški vestnik 37 (1991) 219–222.

1990

• Al#O# - keramika kot material za elemente pnevmatičnih komponent

  J. Vižintin, S. Novak, B. Frelih, Strojniški vestnik 36 (1990) 39–44.

• Al₂O₃ - keramika kot material za elemente pnevmatičnih komponent

  J. Vižintin, S. Novak, B. Frelih, Tribologija 7 (1990) 1–6.

1989

• Novi pogledi v tribologiji

  J. Vižintin, Strojniški vestnik 35 (1989) 143–146

• Nastanek obrabnih delcev pri različnih tipih obrabe in diagnoza poškodb na strojnih elementih

  J. Vižintin, V. Hudnik, Strojniški vestnik 34 (1989) 179–186.

1988

• Obraba nodularne litine NL 50 pri maznem in suhem drsnem trenju

  J. Vižintin, M. Anželj, Zbornik XXXIX. posveta o metalurgiji in kovinskih gradivih (1988) 287–288.

1986

• Znanje za prihranek energije in materialov

  J. Vižintin, Teorija in praksa 23 (1986) 188.

Search

Contact

Laboratory for tribology and interface nanotechnology

University of Ljubljana
Faculty of Mechanical Engineering

Bogišićeva 8, 1000 Ljubljana, Slovenija
tel.: +386 1 4771 460
fax: +386 1 4771 469
e-pošta:

Lubrication Science

EDITOR

prof. dr. Mitjan Kalin

See magazine...

News

• 2024-11-04

  The TINT laboratory received the prestigious Rector's Award for Innovation

• 2024-10-14

  POLYTRIB 2024 conference

• 2024-04-22

  SLOTRIB 2024 conference

• 2023-03-31

  PATRON: Laboratory TINT will be involved in a new HORIZON-MSCA-DN project

• Archive...

Links

• 
•